Pioneer VSX-828-K - Manual (Page 34)

Basic playback 4 4
34
65
7
4 5 Switch on the Bluetooth wireless technology device
that you want to make pairing, place it near the system
and set it into the pairing mode.
6 Check to see that the Bluetooth ADAPTER is detected by
the Bluetooth wireless technology device.
When Bluetooth wireless technology device is connected:
Bluetooth wireless technology device name appears in
the receiver display.
• The system can display alphanumeric characters only.
Other characters may not be displayed correctly.
When Bluetooth wireless technology device is not
connected:
WAITING
appears in the receiver display. In this case,
perform the connection operation from the side of the
Bluetooth wireless technology device.
7 From the Bluetooth wireless technology device list,
select Bluetooth ADAPTER and enter the PIN code
selected in the step 4.
• PIN code may in some case be referred to as
PASSKEY.
Listening to Music Contents of Bluetooth wireless
technology device with Your System
1 Press ADAPTER to switch the receiver to ADAPTER
input.
The ADAPTER input can also be selected by pressing
SOUND RETRIEVER AIR on the front panel. In this case,
S.R AIR , the optimum listening mode, is selected
automatically.
2 Perform the connection operation from the side of the
Bluetooth wireless technology device to the Bluetooth
ADAPTER.
• When the Bluetooth ADAPTER is not plugged into the
ADAPTER PORT
terminal, NO ADP will be displayed if
ADAPTER input is selected.
3 Start playback of music contents stored in Bluetooth
wireless technology device.
This receiver’s remote control buttons can be used for
basic playback of files stored on the Bluetooth wireless
technology device.
• Bluetooth wireless technology device should be
compatible with AVRCP profile.
• Depending on Bluetooth wireless technology device
you use, operation may differ from what is shown in
the remote control buttons.
4 While listening to a source, press then press
ADV SURR repeatedly to select S.R AIR.
AIR JAM
Air Jam – a Pioneer-exclusive application and available for
free.
Air Jam lets you connect multi compatible devices to this unit
using Bluetooth wireless technology. With it, you can make a
group playlist directly on a supported device to play in your
home theater through the unit. You and your friends can add
songs from your devices to the playlist. Also Air Jam lets you
delete the song before anyone has to hear it.
1 Press ADAPTER to switch the receiver to ADAPTER
input.
2 Press TOP MENU to select Bluetooth Setup.
3 Use / to select ‘Air Jam’, then press ENTER .
4 Use / to select ‘Air Jam ON’, then press ENTER .
For more details on using Air Jam, access our website.
http://pioneer.jp/support/soft/iapp_airjam/en.html
The Bluetooth ® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by PIONEER CORPORATION is under license. Other
trademarks and trade names are those of their respective
owners.
Note
• Bluetooth technology works with iPhone 5, iPhone 4S,
iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPad (3rd and 4th
generation), iPad 2, iPad, iPad mini, and iPod touch (2nd
through 5th generation).
• The Air Jam function cannot be used while an iPod is
connected to this receiver.
• With this receiver, when an iPod is connected or
disconnected while the music of a Bluetooth wireless
technology device is playing, the connection with the
Bluetooth wireless technology device may be canceled.
Listening to the radio
The following steps show you how to tune in to FM and AM
radio broadcasts using the automatic (search) and manual
(step) tuning functions. Once you are tuned to a station you
can memorize the frequency for recall later—see Saving
station presets below for more on how to do this.
1 Press TUNER to select the tuner.
2 Use BAND to change the band (FM or AM), if necessary.
Each press switches the band between FM (stereo or
mono) and AM.
3 Tune to a station.
There are three ways to do this:
 Automatic tuning
To search for stations in the currently selected band,
press and hold TUNE / for about a second. The
receiver will start searching for the next station, stopping
when it has found one. Repeat to search for other
stations.
MUTE
RETURN iPod CTRL
RECEIVER
ENTER
MUTE
RETURN
AUDIO PARAMETER MENU
HOME
MENU
TOOLS
BAND
iPod CTRL
PTY
TOP MENU
TUNE
TUNE
P R E S E T P R E S E T
ENTER
VSX-828_SYXE8_En.book 34 ページ ２０１３年３月１日 金曜日 午前９時１６分