Display – Pioneer VSX-828-K User Manual
Page 8
Controls and displays
1
1
8
65
7
4
ALC/STANDARD SURR
(VSX-528 only) – Press for
standard decoding and to switch between the modes of
2
Pro Logic II and NEO:6, and the Auto level control
stereo mode (
page 37
).
ADVANCED SURROUND
– Switches between the various
surround modes (
page 38
).
15
ECO
Switches between ECO Mode 1/ECO Mode 2. When ECO
Mode is turned ON, the display will go dark (
page 38
).
16
iPod iPhone iPad DIRECT CONTROL
Change the receiver’s input to the iPod and enable iPod
operations on the iPod (
page 31
).
17
iPod/iPhone/iPad terminals
Use to connect your Apple iPod/iPhone/iPad or USB mass
storage device as an audio source (
page 21
).
18
HDMI input/MHL connector
Use for connection to a compatible HDMI device (Video
camera, etc.) (
page 22
). An MHL-compatible mobile device
can also be connected here using a MHL cable (sold
separately) (
page 22
).
Display
19
PHASE
Lights when the Phase Control is switched on (
page 39
).
20
AUTO
Lights when the Auto Surround feature is switched on
(
page 37
).
21
Tuner indicators
RDS
– Lights when an RDS broadcast is received
(
page 36
). (for Europe)
ST
– Lights when a stereo FM broadcast is being received
in auto stereo mode (
page 34
).
TUNE
– Lights when a normal broadcast channel.
PRESET
– Shows when a preset radio station is registered
or called.
MEM
– Blinks when a radio station is registered.
kHz/MHz
– Lights when the character display is showing
the currently received AM/FM broadcast frequency.
22
ZONE (VSX-828 only)
Lights when the MULTI-ZONE feature is active (
page 57
).
23
Speaker indicators
Shows if the speaker system is on or not (
page 15
).
24
Sleep timer indicator
Lights when the receiver is in sleep mode (
page 9
).
25
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type,
etc.
26
Character display
Displays various system information.
27
DTS indicators
DTS
– Lights when a source with DTS encoded audio
signals is detected.
HD
– Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
ES
– Lights to indicate DTS-ES decoding.
96/24
– Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6
– When one of the NEO:6 modes of the receiver is
on, this lights to indicate NEO:6 processing (
page 37
).
28
Dolby Digital indicators
2 D
– Lights when a Dolby Digital encoded signal is
detected.
2 D+
– Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
2HD
– Lights when a source with Dolby TrueHD encoded
audio signals is detected.
EX
(VSX-828 only) – Lights to indicate Dolby Digital EX
decoding.
2PLII(x)
(VSX-828 only) – Lights to indicate 2 Pro Logic
II decoding. Light will go off during 2 Pro Logic IIz
decoding (see
Listening in surround sound on page 37
for
more on this).
2PLII
(VSX-528 only) – Lights to indicate 2 Pro Logic II
decoding. (see
Listening in surround sound on page 37
for
29
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see
Using the Advanced surround on page 38
for
30
SIGNAL SELECT indicators
DIGITAL
– Lights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and selected
audio input is not provided.
HDMI
– Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI input
is not provided.
31
Up Mix indicator (VSX-828 only)
Lights when the Up Mix function is set to ON (
page 40
).
32
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched
on (
page 38
).
VSX-828_SYXE8_En.book 8 ページ ２０１３年３月１日 金曜日 午前９時１６分