Pioneer VSX-828-K - Manual (Page 55)

Home Menu 7 7
55
65
7
4 2 Select ‘Component Input’ from the Input Assign menu.
3 Select the desired input option for the COMPONENT
VIDEO IN1 input terminal.
Select between DVD, SAT/CBL or OFF.
4 When you’re finished, press RETURN .
You return to the Input Assign menu.
• Make sure you have connected the audio from the
component to the corresponding inputs on the rear of
the receiver.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
• Default setting: OFF
1 Select ‘Auto Power Down’ from the Home Menu.
2 Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3 When you’re finished, press RETURN .
You return to the Home Menu.
The Network Standby menu
This setting allows the AirPlay function for operating the
receiver from a computer connected on the same LAN as the
receiver to be used even when the receiver is in the standby
mode.
1 Select ‘Network Standby’ from the Home Menu.
2 Choose ON or OFF for the Network Standby.
• ON – The AirPlay function can be used even when the
receiver is in the standby mode.
• OFF – The AirPlay function cannot be used when the
receiver is in the standby mode (This lets you reduce
power consumption in the standby mode).
- If the Network Standby setting is set to ON, the
power consumption during standby will increase.
3 When you’re finished, press RETURN .
You return to the Home Menu.
The MHL Setup menu
Select whether or not to switch the input automatically to the
MHL input when an MHL-compatible device is connected.
Note
• This is only valid for MHL-compatible devices supporting
this function.
1 Select ‘MHL Setup’ from the Home Menu.
2 Choose ON or OFF for the MHL Setup.
3 When you’re finished, press RETURN .
You return to the Home Menu.
The Speaker System setting (VSX-828 only)
Specify either using the surround back speaker (or the
speaker B), or the front height speaker connection with the B-
speaker terminals.
• Default setting: Surr. Back
1 Select ‘Speaker System’ from the Home Menu.
2 Select the speaker system setting using / .
• Surr. Back – Sound is output from the surround back
speaker.
• Height – Sound is output from front height speaker.
3 . I n p u t A s s i g n
R e t u r n
a . A n a l o g I n p u t
b . C o m p o n e n t I n p u t
3 b . C o m p o n e n t I n p u t
R e t u r n
C o m p o n e n t DV D
H o m e M e nu
1 . Au t o M C AC C
2 . M a nu a l S P S e t u p
3 . I n p u t A s s i g n
4 . Au t o Pow e r D ow n
5 . H D M I S e t u p
6 . N e t wo r k S t a n d by
7 . M H L S e t u p
8 . S p e a k e r S y s t e m
9 . O S D S e t u p
4 . Au t o Pow e r D ow n
R e t u r n
Au t o Pow e r D ow n O F F
VSX-828
6 . N e t wo r k S t a n d by
R e t u r n
N e t wo r k S t a n d by O F F
H o m e M e nu
1 . Au t o M C AC C
2 . M a nu a l S P S e t u p
3 . I n p u t A s s i g n
4 . Au t o Pow e r D ow n
5 . H D M I S e t u p
6 . N e t wo r k S t a n d by
7 . M H L S e t u p
8 . S p e a k e r S y s t e m
9 . O S D S e t u p
VSX-828
7 . H M L S e t u p
R e t u r n
Au t o S w i t ch i n g O N
H o m e M e nu
1 . Au t o M C AC C
2 . M a nu a l S P S e t u p
3 . I n p u t A s s i g n
4 . Au t o Pow e r D ow n
5 . H D M I S e t u p
6 . N e t wo r k S t a n d by
7 . M H L S e t u p
8 . S p e a k e r S y s t e m
9 . O S D S e t u p
VSX-828
H o m e M e nu
1 . Au t o M C AC C
2 . M a nu a l S P S e t u p
3 . I n p u t A s s i g n
4 . Au t o Pow e r D ow n
5 . H D M I S e t u p
6 . N e t wo r k S t a n d by
7 . M H L S e t u p
8 . S p e a k e r S y s t e m
9 . O S D S e t u p
8 . S p e a k e r S y s t e m
R e t u r n
S P S y s t e m S u r r. B a ck
VSX-828_SYXE8_En.book 55 ページ ２０１３年３月１日 金曜日 午前９時１６分