Pioneer VSX-828-K - Manual (Page 9)

Controls and displays 1 1
9
65
7
4
Remote control
• The following buttons are not used with this receiver:
-
1 SLEEP
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
SLEEP once.
2  RECEIVER
Switches the receiver between standby and on.
3
Switches the remote to control the receiver (used to select the
white commands above the number buttons ( MIDNIGHT ,
etc)). Also use this button to set up surround sound ( page 52 )
or Audio parameters ( page 41 ).
4 INPUT SELECT
Use to select the input source ( page 27 ).
5 Input function buttons
Use to select the input source to this receiver ( page 27 ). This
will enable you to control other components with the remote
control ( page 60 ).
6 Listening mode buttons
AUTO/DIRECT – Switches between Auto surround mode
( page 37 ) and Stream Direct playback ( page 38 ).
ALC/STANDARD SURR (VSX-828 only) – Press for
standard decoding and to switch between the modes of
2
Pro Logic II, 2 Pro Logic IIx, 2 Pro Logic IIz and
NEO:6, and the Auto level control stereo mode ( page 37 ).
ALC/STANDARD SURR (VSX-528 only) – Press for
standard decoding and to switch between the modes of
2
Pro Logic II and NEO:6, and the Auto level control
stereo mode ( page 37 ).
ADV SURR – Switches between the various surround
modes ( page 38 ).
7 Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button ( BD , DVD ,
etc.).
Press
first to access:
AUDIO PARAMETER – Use to access the Audio options
( page 41 ).
HOME MENU – Press to access the Home Menu
( page 52 ).
RETURN – Confirm and exit the current menu screen.
Press BD , DVD or DVR/BDR first to access:
TOP MENU – Displays the disc ‘top’ menu of a Blu-ray
Disc/DVD.
HOME MENU – Displays the HOME MENU screen.
RETURN – Confirm and exit the current menu screen.
MENU – Displays the TOOLS menu of Blu-ray Disc player.
Press TUNER first to access:
TOOLS – Memorizes stations for recall ( page 34 ), also
used to change the name ( page 35 ).
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands ( page 34 ).
Press iPod/USB first to access:
iPod CTRL – Switches between the iPod controls and the
receiver controls ( page 30 ).
PTY – Use to search for RDS program types ( page 36 ). (for
Europe)
8 /// ( TUNE / , PRESET / ), ENTER
Use the arrow buttons when setting up your surround sound
system ( page 52 ). Also used to control Blu-ray Disc/DVD
menus/options.
Use
TUNE / can be used to find radio frequencies and
PRESET / can be used to select preset radio stations
( page 35 ).
9 Component control buttons
The main buttons (  ,  , etc.) are used to control a component
after you have selected it using the input function buttons.
The controls above these buttons can be accessed after you
have selected the corresponding input function button ( BD ,
DVD and CD ). These buttons also function as described
below.
Press
first to access:
BASS +/– , TRE +/– – Use to adjust Bass or Treble.
• These controls are disabled when the listening mode is
set to DIRECT or PURE DIRECT.
SLEEP
INPUT
1
4
7
RECEIVER
ENTER
2
5
8
DISP
CLR
3
6
9
0 ENTER
CH
CH
MUTE
RETURN
AUDIO
PARAMETER MENU
HOME
MENU
RECEIVER
RECEIVER
SOURCE
TOOLS
BAND iPod CTRL PTY
TOP MENU
TUNE
TUNE
P R E S E T P R E S E T
SHIFT
1
2
11
12
13
14
15
16
3
4
5
6
7
8
9
10
SHIFT
RECEIVER
RECEIVER
RECEIVER
VSX-828_SYXE8_En.book 9 ページ ２０１３年３月１日 金曜日 午前９時１６分