01 controls and displays, Front panel, Controls and displays – Pioneer VSX-828-K User Manual
Page 7
1
1
Chapter
7
65
7
4
Controls and displays
Front panel
1
INPUT SELECTOR
dial
Selects an input source (
page 27
).
2
SPEAKERS
See
Switching the speaker terminal on page 15
.
The Speaker System setting may or may not be displayed,
depending on the input source you have selected.
3
MCACC indicator
Lights when Acoustic Calibration EQ (
page 39
) is on (Acoustic
Calibration EQ is automatically set to on after the Auto
MCACC setup (
page 24
)).
4
ZONE controls (VSX-828 only)
If you’ve made MULTI-ZONE connections (see
Making MULTI-
ZONE connections on page 57
) use these controls to control
the sub zone from the main zone (see
Using the MULTI-ZONE
controls on page 57
).
Receiver control buttons (VSX-528 only)
DIMMER
– Dims or brightens the display. The brightness
can be controlled in four steps.
DISPLAY
– Switches the display of this unit. The listening
mode, sound volume, input name can be checked by
selecting an input source.
5
Character display
See
Display on page 8
.
6
Tuner control buttons
BAND
– Switches between AM, FM ST (stereo) and FM
MONO radio bands (
page 34
).
TUNER EDIT
– Use with
TUNE
/
,
PRESET
/
and
ENTER
to memorize and name stations for recall
(
page 34
).
TUNE
/
– Used to find radio frequencies (
page 34
).
PRESET
/
– Use to select preset radio stations
(
page 35
).
7
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (
page 17
).
8
iPod iPhone iPad indicator
Lights when an iPod/iPhone/iPad is connected and
iPod/USB
input is selected (
page 29
).
9
Remote sensor
Receives the signals from the remote control (see
Operating
range of remote control on page 10
).
10
MASTER VOLUME
dial
11
STANDBY/ON
12
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC
mode (S.R AIR mode can be also selected with
ADAPTER
input).
13
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (
page 24
).
14
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
– Switches between
Auto surround mode (
page 37
) and Stream Direct
playback (
page 38
).
ALC/STANDARD SURR
(VSX-828 only) – Press for
standard decoding and to switch between the modes of
2
Pro Logic II, 2 Pro Logic IIx, 2 Pro Logic IIz and
NEO:6, and the Auto level control stereo mode (
page 37
).
5
6
7
11
12
15
14
17
18
13
3
2
1
8
10
4
9
16
19
20
21
23
24
21
27
28
29
30
30
32
31
25
26
22
VSX-828
VSX-828_SYXE8_En.book 7 ページ ２０１３年３月１日 金曜日 午前９時１６分