Pioneer DJM-900SRT - Manual (Page 21)

21 En
English The MIDI signal waveform pattern switches each time the [LFO FORM (WAKE UP)]
button is pressed.
BEAT , buttons (parameter 1)
Use these to set a waveform output time of 1/4 – 64/1 with
respect to one beat of the BPM.
TIME control (parameter 2) Use this to set the waveform output time.
LEVEL/DEPTH control (param-
eter 3)
—
X-PAD (parameter 4) This changes the MIDI signal’s waveform pattern.
 When [MIDI LFO] is selected, the sound of the external effector connected to the [RETURN]
terminal is not input.
1 When [CF.A], [CF.B] or [MASTER] is selected with the effect channel selector
switch, if the sound of the channel you want to monitor is not being output to
the [MASTER] channel, the effect sound cannot be monitored even if the [CUE]
button for [BEAT EFFECTS] is pressed.
2 If the effect is off, the effect sound cannot be monitored even by pressing the
[CUE] button for [BEAT EFFECTS].