Pioneer VSX-AX3-S - Manual (Page 100)

Techno Tidbits and Problem-solving
100
En
No image is output when a
function is selected. • Improper connections.
• The input source is not properly
selected.
• The video input selected on the TV moni-
tor is incorrect.
• The TV or monitor is hooked up with cord
that is different than that used for the
video player.
• Make sure the component is con-
nected correctly (see pages 16 and 17).
• Press the correct function button.
• Please read the TV monitor manual
and change the settings accordingly.
• Use the same cable to connect to your
TV and all your video equipment (see
pages 16 and 17).
There is no image coming
from the selected
component’s video jacks. • The type of cord connected to the TV
doesn’t match your video input settings.
• Change the settings to match the cord
connected (see page 16).
Can’t record video. • The source is copy protected.
• The recorder’s video input is hooked up
using a different type of cord to the
source video output.
• You can’t record sources that have
been copy protected.
• Hook up the source and the recorder
using the same type of video cord. (see
page 17)
The display is dark. • The display DIMMER button is pushed. • Press DIMMER on the remote control
repeatedly to return to the default set-
ting (see page 55).
You can’t get DIGITAL to come
up when using the SIGNAL
SELECT button. • Either the digital connections or the DIG-
ITAL IN SELECT is incorrect.
• MULTI CH IN mode is on.
• Make sure the digital connections (see
pages 17 and 22) and the DIGITAL IN
SELECT (see page 81) are done cor-
rectly.
• Turn MULTI CH IN mode off (see
page 52).
The digital format indicator
doesn’t light up even when
playing a non-PCM digital
source. • The player is paused or stopped.
• There is a mistake in the player settings
for audio output.
• Play the source.
• Fix the audio settings (check the man-
ual that came with your DVD player).
A compressed digital source is
being played, but the digital
format indicators don’t light
up. • Although it’s a non-PCM digital source
there is a possibility the present track is
not the proper format (5.1, 6.1, or 7.1
channel).
• There is no problem. The indicator
won’t light when the track is not a com-
pressed digital source.
During playback of a
compressed digital source, the
PRO LOGIC II or NEO:6
indicators show in the display. • The digital signal is not being sent with
the source.
• The audio is in two channel format.
• It has already been Dolby surround
encoded.
• Choose DIGITAL or AUTO with the sig-
nal select button (see page 44).
• This is not a malfunction. Check the
manufacturer information for the
source.
During playback of a
Surround EX or DTS ES source
on the AUTO setting, the EX
and ES indicators won’t light. • The source may be 6.1 playback compat-
ible, but there is no signal from the
source to indicate this.
• Switch the SB CH MODE to ON (see
page 53).
During playback of a DVD
audio source, the player
shows a transfer rate of
96kHz, but the receiver does
not. • The multichannel connections are ana-
log, so there is no digital transfer.
• This is not a malfunction. See the
player’s manual for more details.
During playback of a 96kHz
source, the display doesn’t
show 96kHz. • SIGNAL SELECT is set to ANALOG. • Set the SIGNAL SELECT to AUTO (see
page 44).
Cause Remedy
Input/display
Video
Symptom
00_VSX-AX3.book Page 100 Monday, May 19, 2003 1:05 PM