Pioneer VSX-AX3-S - Manual (Page 63)

Using the Tuner
63
En
BA
SIC
Basics of EON (Enhanced Other Network information)
(European model only)
When EON is turned on, the receiver jumps to an EON-linked broadcast when it begins, even if a receiver function
other than the tuner is being used. It cannot be used in areas that EON information is not transmitted and when FM
broadcast stations do not transmit PTY data. When the broadcast ends, the tuner returns to the original frequency
or function.
There are two types of EON you can set:
1 TA (Traffic Announcement)
This mode will set the tuner to pick up traffic information when it’s broadcast.
2 NEWS
This mode will set the tuner to pick up news when it is broadcast.
Memo:
EON does not work when the tuner is in the AM band.
Using EON (European model only)
Use the front panel controls to do this.
1 Press the BAND button to select the
FM band.
EON is only broadcast on FM.
2 Tune into an EON FM station.
The indicator lights to inform you that the currently
tuned station carries the EON data service. See pages 56 -
57 for more on tuning into radio broadcasts.
3 Press the EON MODE button to select
the mode you want.
These modes are explained above.
Each press changes the display as follows:
If EON information is being transmitted, the receiver
jumps to the type of broadcast you selected. When the
EON mode is set, the EON indicator lights, but during
actual reception of an EON broadcast the EON indicator
will flash.
Memo:
•
The EON mode is canceled if you switch to
AM reception while setting EON. It starts
once again when you return to FM recep-
tion.
• You can’t search for traffic announce-
ments and news at the same time.
• You can’t operate the TUNER EDIT and
CHARACTER/SEARCH buttons while the
EON indicator is lit.
• If you want to change to a function other
than the tuner, press the EON MODE but-
ton and turn the EON mode off.
1 3
00_VSX-AX3.book Page 63 Monday, May 19, 2003 1:05 PM