Pioneer VSX-AX3-S - Manual (Page 30)

Displays and Controls
30
En
Remote Control
This page describes the buttons on the remote control used to operate the receiver.
1  RECEIVER (STANDBY/ON) button
Press to turn power of the receiver on or to
standby (off).
2 MULTI CONTROL buttons
These buttons are the basic controls that switch
the mode of the receiver and the remote control,
which allows you to control your other
components.
TV CONT: Press so that the remote control can
operate the TV control commands.
3 Listening mode buttons (see page 45)
SURROUND buttons (MOVIE, MUSIC, &
ENTER):
MOVIE: Press to put the receiver into MOVIE
listening mode (see page 46).
MUSIC: Press to put the receiver into MUSIC
listening mode (see page 47).
: Use to select the MOVIE or MUSIC
listening mode.
ENTER: Use this button to enter information
concerning the listening modes.
STEREO/DIRECT (see page 45): Switches the
receiver into STEREO mode if it was in a different
sound mode or toggles between DIRECT and
STEREO mode.
4 SYSTEM SETUP button
Use for all system setups, including the speaker
and sound systems. For more information see
“Setting Up for Surround Sound” starting on
page 36. For a DVD player use this button to
bring up the DVD menu and for a tuner use this
button in the same way as the TUNER EDIT
button.
00_VSX-AX3.book Page 30 Monday, May 19, 2003 1:05 PM