Pioneer VSX-AX3-S - Manual (Page 19)

Connecting Your Equipment
19
En
PREPARATION
Connecting Satellite TV (SAT) Components
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
outlet.
Hook up the video signal with either S video, or composite video cords, depending on how you connected the
receiver to your TV (see page 16).
For the audio signal, in order to use digital soundtracks broadcast you must hook up a digital input. Use
either a coaxial or optical cable, it doesn’t matter which (see page 23). We recommend hooking up your audio
with analog cables as well (see below).
*The arrows indicate the direction of the TV signal.
Memo:
If your digital connections are different than the default settings (see page 23) you will need to assign the
digital jacks to the proper component(s).
COMPO-
NENT
VIDEO
OUT
VIDEO
AUDIO
L
R
DIGITAL ANALOG
DIGITAL
S-VIDEO
Y
P B
P R
Satellite tuner
00_VSX-AX3.book Page 19 Monday, May 19, 2003 1:05 PM