Pioneer VSX-AX3-S - Manual (Page 91)

Expert System Settings
91
En
EXPERT
To use the DATA CHECK feature follow the steps here.
1 Use the  buttons to select DATA
CHECK. Press ENTER.
2 Select either ALL CH ADJUST or
FRONT ALIGN as the data you want
to check. Press ENTER.
3 Use the  buttons to select the
channel that you want to check. Press
ENTER.
That channel appears so you can check the setting.
4 When that channel has been checked,
use the  buttons to select the EXIT
and press ENTER.
5 Repeat step 3 and 4 to check all the
channels.
6 When all channels have been checked
select EXIT (if it’s not already
selected) and press ENTER.
Leave the setup by using the  buttons to select EXIT
and pressing ENTER. You can now go to another
ACOUSTIC CAL EQ setting by using the
 buttons and
pressing ENTER.
Left
Right
1
2
3
4
00_VSX-AX3.book Page 91 Monday, May 19, 2003 1:05 PM