Listening with acoustic cal eq, Digital noise reduction (digital nr function) – Pioneer VSX-AX3-S User Manual

Page 49

Advertising
background image

Basic Operation

49

En

BA
SIC

Listening with ACOUSTIC CAL EQ

You can listen to the soundtrack with the ACOUSTIC CAL EQ you set automatically when you did the AUTO
SURROUND SETUP (page 13) or you set manually on (page 87). To do so follow the instructions below.

1 Press the ACOUSTIC EQ button.

Each press switches ACOUSTIC CAL EQ between ALL CH
ADJUST, FRONT ALIGN, CUSTOM 1, CUSTOM 2 and OFF.
When ACOUSTIC EQ is being applied the MCACC indica-
tor lights.

Memo:
• After completing the AUTO SURROUND SETUP

(

page 13

) ACOUSTIC EQ ON (ALL CH ADJUST) is set

automatically.

• You can’t turn on ACOUSTIC EQ on in MULTI CH IN

mode.

• If you turn ACOUSTIC EQ on in DIRECT mode, the

receiver automatically switches to STEREO mode.

Digital Noise Reduction (DIGITAL NR Function)

To reduce extraneous noise switch on DIGITAL NR. This feature is effective with sources containing a lot of
background noise like cassette and video tape.

1 Press RECEIVER.

2 Press the DNR button on the remote

control.

Each press switches DIGITAL NR on or off.
When on, DNR lights in the display.

Memo:
• In cases described below, noise may not be reduced

even if DIGITAL NR is on.
· Sudden noise
· Extremely loud noise
· Signals that contain too many high frequencies
· Signals which are very clean to begin with

• DIGITAL NR is effective at levels shown below for each

source.
STEREO
· Analog input..................................................... 10-18 dB
· Digital input...................................................... 10-15 dB
· AM/FM tuner .................................................... 10-15 dB
MOVIE/MUSIC ..................................................... 6-10 dB

• Depending on the condition of the source, there may

not be a noticeable improvement in the quality of the
sound.

• You can’t use the DIGITAL NR mode with the THX

CINEMA, MULTI CH IN modes or source signals greater
than 88.2kHz over a digital connection.

• If you set the DIGITAL NR on in DIRECT mode the

receiver will switch to STEREO mode.

1

MCACC indicator

00_VSX-AX3.book Page 49 Monday, May 19, 2003 1:05 PM

Advertising
This manual is related to the following products: