Pioneer VSX-AX3-S - Manual (Page 79)

Using Other Functions
79
En
EXPERT
Resetting the Main Unit
The following operations allow you to reset the unit to the default settings.
Put the receiver in the STANDBY mode.
1 While holding down the TONE button
press the STANDBY/ON button for
about three seconds.
2 When you see RESET? appear in the
display, press the TONE – button. OK?
appears in the display, press TONE +.
When OK appears in the display all the settings, including
the speaker, surround sound settings and tuner settings,
will be reset in the unit to the default settings.
Memo:
If the receiver is disconnected from a power source for
about a month or longer it will reset to the default settings.
2 2
1 1
00_VSX-AX3.book Page 79 Monday, May 19, 2003 1:05 PM