Pioneer X-HM30V-S - Manual (Page 13)

X-HM30V_En.fm
En-13
2011July 5
8
7
6
5
4
3
2
1
Changing the setup menu
Turn on the TV, and switch the input to the “VIDEO 1”,
“VIDEO 2”, etc. accordingly.
Notes:
l During playback, “PREFERENCE” settings cannot be
changed.
l Settings are stored even if the unit is set to the stand-
by mode.
l The backup function protects the stored settings for a
few hours should there be a power failure or the AC
power lead disconnection.
l If the startup screen is blurred, change the TV type in
the setup menu.
1 Press the STANDBY/ON button to turn the power on.
l The startup screen appears.
l The startup screen does not appear
when the input is not set to the disc
mode. Press the DVD/CD button
on the remote control or INPUT
button on main unit repeatedly to
select DISC mode.
MEMORY/FOLDER
+
DVD/CD
STANDBY/ON
SETUP/VIDEO MODE
ENTER
2 Press the SETUP/VIDEO MODE button.
3 Press the
 or  button to select a menu and press
the ENTER button.
l See the list on pages 13 - 15 for setup menu.
4 Press the , ,  or  button to change the setting
and press the ENTER button.
l See the list on pages 13 - 15 for the selectable
parameters.
5 Press the SETUP/VIDEO MODE button.
l The setting is completed.
l To change other settings, begin from step 2.
Setup menu Selectable parameters (* indicates default setting) Description
GENERAL
SETUP
PAGE
TV DISPLAY 4:3 PANSCAN*
4:3 LETTERBOX
16:9
WIDE SQUEEZE The screen mode should be set according to
the connected TV type (for details, see page
16).
ANGLE
MARK ON*
OFF
OSD
LANGUAGE ENGLISH*
GERMAN
FRENCH
ITALIAN
SPANISH You can select the desired OSD (On Screen
Display) language for the setup menu or
playback control screen.
SCREEN
SAVER ON* A screen saver appears.
OFF The screen saver disabled.
LAST
MEMORY ON* If accidentally push STANDBY/ON or OPEN/
CLOSE button during playback mode, you
can resume playback from the point playback
is stopped after power on back or you push
the OPEN/CLOSE button to close the disc
tray.
OFF Last memory not function.
AUDIO
SETUP
PAGE
ANALOG
AUDIO DOWNMIX LT/RT
STEREO*
DIGITAL
AUDIO DIGITAL
OUT SPDIF OFF
SPDIF/
RAW*
SPDIF/PCM When playing a disc recorded with Dolby
Digital or DTS, the corresponding digital
signals will be output.
l
PCM : Choose this setting if the decorder
cannot support Dolby Digital or DTS.
l RAW : Choose this setting if the decorder
can support Dolby Digital or DTS.
LPCM OUT 48KHZ*
96KHZ Select the sampling frequency at 48 kHz/16
bit or 96 kHz/24 bit capability after you select
SPDIF/PCM at SPDIF SETUP.
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
SCREEN SAVER
LAST MEMORY
GO TO GENERAL SETUP PAGE
- - GENERAL SETUP PAGE - -
AUDIO DOLBY VIDEO
PS
ON
ENG
ON
OFF
GENERAL PREFEREN.
ANALOG AUDIO
DIGITAL AUDIO
GO TO AUDIO SETUP PAGE
- - AUDIO SETUP PAGE - -
DOLBY VIDEO GENERAL AUDIO PREFEREN.