Pioneer X-HM30V-S - Manual (Page 41)

X-HM30V_En.fm
En-41
2011July 5
8
7
6
5
4
3
2
1
Timer and sleep operation (Remote
control only) (continued)
Checking the timer setting:
Cancelling the timer setting:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
The radio, disc, iPod, USB and Line In can all be turned off
automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the STANDBY/ON button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
Headphones
l Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
l Before plugging in or unplugging the headphone,
reduce the volume.
l Be sure your headphone has a 3.5 mm diameter plug
and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
l Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
l Audio from the iPod/iPhone cannot be heard via the
headphones connected to the unit. “HP INVALID” will
be displayed if you connect the headphones when the
iPod/iPhone function is selected.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 30 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3 Within 30 seconds, press the or button to select
"Timer Call", and press the ENTER button.
1 Turn the power on and press and hold down the CLOCK/
TIMER button.
2 Within 30 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3 Within 30 seconds, press the or button to select
"Timer Off", and press the ENTER button. Timer will be
cancelled (the setting will not be cancelled).
1 Turn the power on and press and hold down the CLOCK/
TIMER button.
2 Within 30 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3 Within 30 seconds, press the or button to select
"Timer On", and press the ENTER button.
4 Press the STANDBY/ON button to enter the power
stand-by mode.
n Sleep operation
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the Numeric button to set the
time (1 minute - 99 minutes)
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
n To use timer and sleep operation together
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 40).
Desired time 1-99 minutes
Sleep operation will
automatically stop
Sleep timer
setting
Timer playback
setting
End
time
Timer playback
start time