Pioneer CNDV-50MT - Manual (Page 108)

106
Appendix
NAVI/AV
When the installation is complete, the open-
ing display appears.
6
Press the NAVI/AV button to change the
navigation screen.
Some time is needed until navigation is ready.
7
Check the details of the cautionary mes-
sage and touch “OK”.
8
To set the time difference, touch “+” or
“–”.
The time difference between the time origi-
nally set in this unit (Central European Time)
and the current location of your vehicle is
shown. If necessary, adjust the time differ-
ence. Touching “+” or “–” changes the time
difference display in one-hour increments.
The time difference can be set from +3 to –3
hours.
9
If necessary, set to summer time.
Summer time is off by default. Touch
“Summer Time” to change the time if sum-
mer time is in effect. This turns the display
below Summer Time “On”.
10
To complete the setting, touch “Back”.
The map of your surroundings appears.
This completes the setup of your Navigation Sys-
tem. Chapter 1 explains the basic operation of
your Navigation System.
➲ To change the time later ➞ Page 57
Time difference