Pioneer CNDV-50MT - Manual (Page 59)

57
Chapter 5
Customising Your Navigation System
NAVI
Demo Mode
This is a demonstration function for shops. After
a route is set, the simulation of the route guid-
ance to a destination is automatically displayed.
Normally, set this to “Off”.
On (Repeat) :
Repeat demo drive.
Off* :
Demo Mode is set off.
❒ If you eject the map disc during the demo
drive, the demo mode will be stopped.
Time
Adjusts the systems clock. The time difference
(+, –) between the time originally set in this unit
is set here.
You can also select summer time On/Off.
➲ Time settings ➞ Page 106
On :
Summer time is taken into account.
Off* :
Summer time is not taken into account.
❒ When the period of summer time comes, or
when the summer time ends, this unit does
not automatically change the summer time
setting.
➲ Change the summer time setting ➞ Page 106
Modify Current Location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
Hardware Info
Touch “Hardware Info” in the Setting Menu to
display.
Connection Status
➲ Connection Status ➞ Page 51
3D Calibration Status
➲ 3D Calibration Status ➞ Page 51
Service Info Screen
Displays the disc production number and version
information.
Restore Factory Settings
Reset various settings registered to the Naviga-
tion
System and restores to the default or factory set-
tings. To restore, touch “Yes”.
❒ When you restore the settings to their status
at shipping, the information set in the
Address Book, Destination History,
Overlay POI Areas to Avoid, Language
Selection, Time, Return Home, Go to,
Modify Current Location, Background
Picture Settings, Defined Locations, and
Short-Cut Selection menus is not deleted.