Pioneer CNDV-50MT - Manual (Page 98)

96
Chapter 8
Customising the Audio Source Setting
AV
Setting the automatic open
function
When you do not wish the display to open/close
automatically, you can set the automatic open
function to the manual mode.
1
Touch “AUTO FLAP” in the SETUP
menu.
Each touch of the “AUTO FLAP” changes
the settings as follows:
• MANUAL — You have to press OPEN/
CLOSE button to open/close the display
• AUTO — The display automatically opens/
closes when power to navigation unit is
turned on
Using the AUX source
An IP-BUS-RCA Interconnector such as the CD-
RB20/CD-RB10 (sold separately) lets you connect
navigation unit to auxiliary equipment featuring
RCA output. For more details, refer to the IP-BUS-
RCA Interconnector owner’s manual.
Selecting AUX as the source
1
Touch the source icon and then touch
“AUX” to select AUX as the source.
When the source icon is not displayed, you
can display it by touching the screen.
If the auxiliary setting is turned “OFF”, “AUX”
cannot be selected.
➲ Switching the auxiliary setting ➞ Page 93
Switching the background dis-
play
You can switch background displays while listen-
ing to each source.
1
Press ENT button.
Each time you press ENT button the display
changes in the following order:
Audio source
• NAVI (Normal wall paper) — AV (Video
input) — DVD (DVD-Video in the built-in
DVD drive)
Video source
• Video of currently selected source — NAVI
(Normal wall paper) — AV (Video input) —
DVD (DVD-Video in the built-in DVD drive)
❒ When the AV (Video input) setting is not
set to “VIDEO”, the background display
will not switch to AV (Video input).
➲ Switching the AV input setting ➞ Page 94
❒ Only the REAR ON mode is active, the
background display will switch to DVD
(DVD-Video in the built-in DVD drive).
➲ Using the rear display ➞ “Hardware Man-
ual”
❒ During the memory navi mode, you cannot
switch to DVD (DVD-Video in the built-in
DVD drive).
Switching the Screen Using the
DISP Button
You can change the screen display using the
DISP button.
(E.g., RADIO)
❒ You cannot switch the screen display with the
DISP button for the following sources.
S-DVD (Source DVD), AV, AUX, EXT
❒ The indication of the information plate will be
switched for the items marked with asterisk
(*).
RADIO
Preset list — list off (Information plate only)
Preset list
Information plate
Switching the Screen Using the
DISP Button