Pioneer CNDV-50MT - Manual (Page 87)

85
Chapter 7
Using the AV Source (Pioneer AV Equipments)
AV
Operate the external unit by
using FUNCTION 1 -
FUNCTION 4
The external unit can be operated by transmitting
the operating commands set to FUNCTION 1 -
FUNCTION 4.
❒ The operating commands set to FUNCTION
1 - FUNCTION 4 vary depending on the exter-
nal unit.
❒ Some functions may not be operated until you
touch and hold the key.
1
Touch “FUNCTION 1” - “FUNCTION 4” in
the FUNCTION menu.
2
Touch “SEND”.
The command displayed in “Command
name” is transmitted to the external unit.
Switching the automatic and
manual function
You can turn automatic and manual function on
or off.
You can switch between AUTO and MANUAL
functions of the external unit connected.
Initially, this function is set to AUTO.
❒ Operating commands set for AUTO and
MANUAL operations vary depending on the
external unit connected.
1
Touch “AUTO / MANUAL” in the
FUNCTION menu.
Touching “AUTO / MANUAL” switches
between “AUTO” and “MANUAL”.
EXT