Pioneer CNDV-50MT - Manual (Page 23)

21
Chapter 2
Menu and Map Display
NAVI
Chapter 2
Menu and Map Display
This section describes the basic operations,
including how to display the main menu and how
to use the shortcut menu and the map screen.
How to Use Menu Screens
The basic operation of the navigation is per-
formed by using menus.
There are two types of menu: the “Main menu”
and the “Shortcut menu”.
❒ The functions that cannot be used during the
memory navi mode are indicated in light grey.
If you want to use such functions, insert the
map disc.
Main menu
You use this menu for basic operation of your
Navigation System.
1
With the map displayed, press the NAVI
MENU button.
2
To change to the menu you want to use,
touch the name of the menu displayed at
the top of the screen.
The main menu is divided into four:
“Destination”, “Traffic/Info”, “Route
Options”, and “Settings”.
3
If you want to return to the map, press the
POS (or NAVI MENU) button.
Destination menu
Select the destination search method. Also the
route set can be cancelled from this menu.
➲ Specifying the address and searching the des-
tination ➞ Page 14
➲ Searching the destination by map ➞ Page 27
➲ Other search methods ➞ Page 29 to 32
Traffic/Info menu
Used to check traffic information or select the
RDS-TMC station.
➲ All Traffic ➞ Page 46
➲ Traffic On Route ➞ Page 47
Route Options menu
Used to specify the conditions for setting the
route to the destination.
➲ Setting the Route Options ➞ Page 33
❒ ”Edit Current Route”, “View Current
Route”, and “Recalculate” can be used
when the route is set.
Settings menu
Set the navigation functions so they can be used
easily.
➲ Settings menu ➞ Chapter 5