Pioneer LX01 - Manual (Page 104)

Playback 07
104
En
Playing from the HDD
The table below shows the basic playback controls when
playing video recorded on the hard disk (HDD).
Playing CDs and WMA/MP3 discs
The table below shows the basic playback controls for
Audio CDs 1 , and WMA/MP3 files.
(LCD page 2)
Except VR mode: During playback, enter a
chapter number then press
ENTER to skip
directly to that chapter within the currently
playing title.
On some discs, you can also use the num-
ber buttons to select numbered items in
the disc menu.
VR mode only: During playback, enter a
title number then press
ENTER.
All: Press CLEAR to clear a number entry
and start again.
(LCD page 1)
(Commercial back/skip)
Each press skips backward/ forward
progressively up to a maximum of two
hours in either direction.
(LCD page 1)
While paused, press and hold to start
slow-motion playback. Press repeatedly to
change the playback speed.
While paused, press to advance a single
frame in either direction.
Press to display the menu of a DVD-Video
disc. (DVD+R/+RW discs finalized on this
recorder will display the Disc Navigator.
Press
MENU to display the disc menu.)
Use the cursor buttons to navigate DVD-
Video disc menus; press
ENTER to select
items.
Press to return to the previous level of a
DVD-Video disc menu.
(LCD page 1)
Press to start playback.
If
RESUME is displayed on-screen, play-
back starts from the place last stopped.
Playback automatically stops after the end
of a title is reached.
(LCD page 1)
Press to stop playback.
You can resume playback from the same
point by pressing
 (Play). (Press  (Stop)
again to cancel the resume function.)
(LCD page 1)
Pauses playback, or restarts playback
when paused.
1 2 3
4 5 6
7 8 9
0 CLEAR
ENTER
CM
BACK
CM
SKIP




TOP MENU
MENU
ENTER
RETURN
(LCD page 1)
Press to start scanning. Press repeatedly
to increase the scanning speed.
(LCD page 1)
Press to skip to previous/next chapter/title.
(LCD page 2)
During playback, enter a title number then
press
ENTER to skip directly to that title.
Press CLEAR to clear a number entry and
start again.
(LCD page 1)
(Commercial back/skip)
Each press skips backward/ forward
progressively up to a maximum of two
hours in either direction.
(LCD page 1)
While paused, press and hold to start
slow-motion playback. Press repeatedly to
change the playback speed.
While paused, press to advance a single
frame in either direction.
(LCD page 1)
Press to start playback.
(LCD page 1)
Press to stop playback.
(LCD page 1)
Pauses playback, or restarts playback
when paused.
(LCD page 1)
Press to start scanning. Press again to
increase the scanning speed. (There are
two scan speeds; the current scan speed
is shown on-screen.)
(LCD page 1)
Press to skip to previous/next track.
Note
1 If you want to play a DTS Audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise
will be output through the analog outputs. Also make sure that STEREO is selected using the button (LCD page 3) (see Switching audio
channels on page 111).




 
1 2 3
4 5 6
7 8 9
0 CLEAR
ENTER
CM
BACK
CM
SKIP








 
02SDVRLX70D_EN.book 104 ページ ２００８年１０月９日 木曜日 午後４時３８分