Switching on, Setting up, Before you start – Pioneer LX01 User Manual

Page 27: Before you start 04, Chapter 4

Advertising
background image

Before you start

04

27

En

Chapter 4

Before you start

Switching on

When the remote control’s

SYSTEM ON button is

pressed, the power of both the receiver subwoofer and
HDD/DVD recorder turns on.

The HDD/DVD recorder and receiver subwoofer have
separate power switches. The power switch for the
receiver subwoofer is located on the display unit.

The table below shows what needs to be switched on for
various system functions:

Setting up

After connecting and installing the HDD/DVD recorder
and receiver subwoofer, complete the steps below to set
the system up for use.

HDD/DVD recorder

• Set the date and time, TV channel tuning and the type

of TV in the Setup Navigator (page 68).

Receiver subwoofer

• Complete the Auto MCACC setup to optimize the

surround sound (see below).

Using the Auto MCACC setup for optimal
surround sound

The Multichannel Acoustic Calibration (MCACC) system
measures the acoustic characteristics of your listening
area, taking into account ambient noise, and testing for
channel delay and channel level. After you have set up
the microphone provided, the system uses the
information from a series of test tones to measure
standing wave and reverb, optimizing the speaker
settings and equalization (MCACC Effect) for your

particular room.

1

Important

• The test tones used for Auto MCACC setup are loud;

however, do not turn the volume down during setup
as this may result in a sub-optimal setup.

• Make sure the microphone and speakers are not

moved during the MCACC setup.

SYSTEM

SURR

ADV.

SURR

F.S.

SURR

INPUT

DVR

BD

DVD

TV

FM / AM

ON

SYSTEM

INPUT

SELECT

OFF

HDMI 1

HDMI 2

HDMI 3

TV

ON

SYSTEM

USB

DV IN

STANDBY/ON

STANDBY/ON

STANDBY/ON

HDD/DVD recorder

Display unit

Receiver

subwoofer

Function

Display unit

HDD/DVD recorder

DVD playback

On

On

CD playback

On

On

HDD playback

On

On

Radio

On

Off

Timer recording

Off

On

Note

1 You only need to use the Auto MCACC setup once (unless you change the placement of your speakers or your room layout).

01SX-SW70SW_EN.book 27 ページ 2008年10月9日 木曜日 午後4時32分

Advertising