Connecting a tv antenna, Easy connections, Recorder connections – Pioneer LX01 User Manual

Page 62: Recorder connections 02, Chapter 2, Coaxial

Advertising
background image

Recorder connections

02

62

En

Chapter 2

Recorder connections

Connecting a TV antenna

This recorder has separate built-in TV tuners for
terrestrial digital and terrestrial analog TV broadcasts.

If you are ready to receive digital broadcasts now, use one
of the supplied RF antenna cables connect an antenna
(either an antenna wall outlet or indoor antenna) to the
ANTENNA (DIGITAL) IN connector. Next, connect the
other supplied RF antenna cable to connect an antenna
to the

ANTENNA IN (RF IN) connector. Lastly, connect

the recorder to your TV from the

ANTENNA OUT

connector.

Important

• If there is only one antenna outlet on your wall, use a

divider.

• Do not connect a component that can receive analog

signals to the

ANTENNA (DIGITAL) OUT.

If your area is not yet served with terrestrial digital services,
connect your antenna’s output to the

ANTENNA IN (RF

IN) connector using one of the supplied RF antenna
cables. Next, connect the recorder to your TV from the
ANTENNA OUT connector.

We strongly recommend using an outdoor antenna for
better broadcast picture quality.

If, however, you want to use an indoor antenna, use one
with a signal amplifier rated at 5 V, 30 mA and set Aerial
Power
to

On in the Initial Setup menu (see page 153).

Easy connections

• While we recommend using an HDMI connection

(see page 13), you can also connect easily by using a
SCART cable.

The setup described below is a basic setup that allows
you to watch and record TV programmes, and play discs.
Other types of connections are explained starting on the
following page.

Important

• The

AV1 (RGB)-TV AV connector can output ordinary

(composite), S-Video or RGB video, plus stereo
analog audio. The

AV2 (INPUT 1/DECODER)

connector accepts ordinary, S-Video and RGB video
input, as well as stereo analog audio. See AV1 Out
and AV2/L1 In on page 155 for how to setup these
options.

• Before making or changing any rear panel

connections, make sure that all components are
switched off and unplugged from the wall outlet.

AC IN

DIGITAL

AUDIO OUT

COAXIAL

HDMI OUT

ANTENNA(DIGITAL)

IN

OUT

5 V

30 mA

CONTROL

G-LINK

IN

AV 1 (RGB) – TV

AV 2 (INPUT 1/DECODER)

ANTENNA

IN

OUT

TV

Antenna wall outlet
or indoor antenna

Antenna wall outlet

ANTENNA
IN (RF IN)

ANTENNA

(DIGITAL) IN

ANTENNA

OUT

To antenna input

AC IN

DIGITAL

AUDIO OUT

COAXIAL

HDMI OUT

ANTENNA(DIGITAL)

IN

OUT

5 V

30 mA

CONTROL

G-LINK

IN

AV 1 (RGB) – TV

AV 2 (INPUT 1/DECODER)

ANTENNA

IN

OUT

TV

Antenna
wall outlet

ANTENNA
IN (RF IN)

ANTENNA

OUT

To antenna input

02SDVRLX70D_EN.book 62 ページ 2008年10月9日 木曜日 午後4時38分

Advertising