Pioneer LX01 - Manual (Page 79)

Using the GUIDE Plus+ electronic programme guide 04
79
En
The Schedule Area
The Schedule Area is where you can set, see, edit and
delete scheduled (timer) recordings.
From the Schedule Area you can:
• Edit or delete a One-Button-Recording
• Set, edit or delete a VIDEO Plus+ recording
• Set, edit or delete a manual recording
Editing a scheduled recording
You can edit any parameter in a scheduled recording, or
delete it if you no longer require it 1 .
1 Highlight the left tile of a scheduled recording.
• If you only want to edit the recording quality,
frequency, destination, timing or genre settings, skip
to step
5 below.
2 Press the GREEN Action button (Edit).
3 Use the cursor and number buttons (LCD Page 2) to
edit the recording date, start time, end time and
channel.
Use the / buttons or the number buttons to edit.
Press the GREEN Action button to go to continue, or the
RED Action button to go back.
4 Enter a name for the scheduled recording.
Use the /// buttons followed by ENTER to select
characters from the on-screen keyboard.
After entering the whole name, press the GREEN Action
button to continue.
5 Highlight the right recording tile.
6 Press the RED Action button (Quality) to change
the recording quality.
Select from AUTO 2 , XP, SP, LP, EP, SLP, SEP or a manual
recording mode (see Manual Recording on page 157 and
Manual recording modes on page 164).
Note
1 See About timer recordings on page 98 for more information about scheduled recordings.
2 This mode maximizes the recording quality to fit on to a single DVD disc. Can also be used when recording to HDD.
02SDVRLX70D_EN.book 79 ページ ２００８年１０月９日 木曜日 午後４時３８分