Pioneer LX01 - Manual (Page 153)

The Initial Setup menu 15
153
En
Digital Tuner
Replace Channels Next Screen Scans for digital channels and replaces all the channel presets with the
results. Before the scan starts you will need to select your country.
After the scan is complete the recorder tells you whether any new channels
were found, and if so, how many.
(You can cancel the scan before it has finished by pressing
HOME MENU or
RETURN. In this case, no channels are set.)
If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.
Add New Channels Next Screen Automatically scans for new digital channels.
After the scan is complete the recorder tells you whether any new channels
were found, and if so, how many.
(You can cancel the scan before it has finished by pressing
HOME MENU or
RETURN. In this case, no new channels are set.)
Channel Sort Next Screen Use this screen to sort channel presets into your prefered order. Use the
/// buttons to highlight the channel you want to move, press
ENTER. Use the cursor buttons again to highlight the position you want to
move the channel preset to, then press
ENTER again.
(If there are more channel presets than will fit on one screen, you can select
the next/previous page by highlighting the small triangular marks and
pressing
ENTER.)
Channel Options Next Screen From this screen you can skip or lock channels. Locked channels will require
the correct password to be entered before the channel can be watched. Use
the
/// buttons to highlight a preference box and press ENTER to
toggle the preference.
To enter this screen, input the parental lock password when prompted (if one
has not yet been set then the password you enter becomes the parental lock
password).
Auto Skip Off • No channels are automatically skipped.
Radio Radio channels are skipped when selecting channels.
Data Data channels are skipped when selecting channels.
Radio & Data Radio and data channels are skipped when selecting channels.
Signal Check Next Screen Use this screen to check the signal level and quality of digital channels. Use
the
/ buttons to change the RF channel; select Add New Channels
then press ENTER to scan for new channels; press HOME MENU to exit.
Aerial Power On Power is supplied to the connected aerial (antenna) when this recorder is on
or in standby.
Auto Power is supplied to the connected aerial (antenna) only when this recorder
is on.
Off • This recorder does not supply power to the connected aerial (antenna).
If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly, or it may be shorted. In either
case, check the connection and try making the setting again.
D.TV Language Next Screen From this screen you can set your Primary and Secondary Audio preference
for multilingual digital broadcasts, your Primary and Secondary Subtitle
preference for programmes that are broadcast with subtitles, and your
Teletext language preference. Use the
/ buttons to highlight a field then
use the / buttons to change it.
Setting Options Explanation
02SDVRLX70D_EN.book 153 ページ ２００８年１０月９日 木曜日 午後４時３８分