Backing up images from the camera to a pc, P.139), P.139), th – Toshiba Gigashot A Series User Manual
Page 161
Owner’s Manual
139
Hard Disk Camera GSC-A100FE/GSC-A40FE
Backing Up Images from the Camera to a PC
When you connect the camera to the PC with the USB cable, any newly
added recorded images are automatically transferred to the PC.
You can use the bundled ImageMixer 3 or Nero Vision 5 software to record
images backed up on a PC onto an HD DVD or DVD.
Preparation
First install ImageMixer 3, Nero Vision 5 and ShowTime 4 on the PC
(
Turn on the PC and the camera.
1. Connect the camera to the PC with the USB cable.
Newly added recorded images are automatically transferred to the PC.
The backup icon (
p.31) is displayed on the transferred images.
Once image transfer ends, ImageMixer 3 starts up.
MEMO
Connections between the camera and the PC are monitored by
“Camera Monitor”. You should close any other monitoring tools that are
running. Camera Monitor may not function normally if other monitoring
tools are active.