Toshiba Gigashot A Series - Manual (Page 92)

70 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Setting the Video Quality
1. From the recording menu ( p.34), select [VIDEO QUALITY].
Use the jog dial to select [VIDEO QUALITY] and then press the OK ( )
button.
2. Select the video quality.
Use the jog dial to select the video quality and then press the OK ( )
button.
XQ:
Extra-high quality (1920 × 1080)
HQ: High quality (1440 × 1080)
SP: Standard play (1440 × 1080)
Approximate Video Recording Times
The table below shows the approximate video recording times.
Because the amount of data used varies depending on the subject being
recorded, the recording durations listed below are approximate and may
vary.
* 1GB = 1 billion bytes. The actual formatted capacity may be lower than the
figure shown here.
Video quality
Recording time
100GB* 40GB*
XQ 12hr00min 4hr40min
HQ 17hr40min 7hr00min
SP 23hr20min 9hr20min
RECORDING MENU
XQ
STILL IMAGE SIZE
EXIT
SELF-TIMER
VIDEO QUALITY
SAVE TO
ERASE
RECORDING MENU
VIDEO QUALITY
CANCEL
MEMO
The available recording time actually displayed will vary depending on
the image quality and the amount of space available on the drive.
The video quality setting is retained if you switch to Auto mode. You can
also change the setting.