Toshiba Gigashot A Series - Manual (Page 81)

Owner’s Manual 59
Hard Disk Camera GSC-A100FE/GSC-A40FE
Setting the Flash
You can set the flash when you are shooting still images.
1. Display the flash menu.
In recording mode, move the OK ( ) button left.
2. Set the flash.
Move the OK ( ) button left or right to select [FLASH] and then press
the OK ( ) button.
Flash Settings
Flash Flash operation and suggested
situations
Supported
scenes
AUTO The flash fires automatically as
required by the shooting conditions.
AUTO
RED-EYE
REDUCTION
The flash fires automatically as
required by the shooting conditions.
The flash fires twice and the shot is
taken when the flash fires the second
time.
Use this mode to reduce the red-eye
effect ( p.156) when you are
photographing people or animals.
Works best when the subject is
looking directly at the camera and is
relatively close.
AUTO,
PORTRAIT
FORCED
FLASH
The flash fires for every shot.
Used for backlit shots and shots
taken under artificial lighting
(fluorescent lights, etc.).
AUTO, NIGHT
SCENE,
SNOW&BEACH
SUPPRESSED
FLASH
The flash does not fire.
Used for shots taken using indoor
lighting and where the subject is
beyond the effective range of the
flash, such as theater and sporting
events.
All
FLASH
AUTO
OK OK CANCEL CANCEL OK CANCEL