Toshiba Magnia 3310 User Manual
Page 131
Advertising
Troubleshooting
Troubleshooting Information
127
Unable to continue the installation because the system does
not recognize a Hard Disk Drive or Logical Drive.
Point:
During SST starting.
Reason:
The HDD is not found physically.
Action:
1. Check that the HDD(s) are operating
correctly, by using Hardware diagnostic
program etc.
2. Check that the HDD(s) are connected
correctly.
3. Check that the SCSI cable is connected
correctly.
4. Check that the BIOS configuration of SCSI
and RAID is set up correctly.
Advertising