Toshiba Magnia 3310 - Manual (Page 95)

Hardware Diagnostics
Items of Hardware Diagnostics
91
Adding Test Items
To add a test item to the Running test, press <Ins> key, then select
a test item with arrow keys, and press <Enter> to select subtests.
To return to the previous menu, press <Esc> key.
NOTE: Do not add the subtest [01. Pressed Key Display] of
[02. KEYBOARD TEST] to the Running test. This subtest
requires a key input so that the Running test in progress is
stopped if this subtest is added to the Running test.
Do not select only the subtest [08. CACHE MEMORY TEST]
as the Running test.
Deleting Test Items
Move the cursor on a test item, then press <Del> to delete the test
item.
Saving Test Items
When you exit the test items selection menu, the message "Do you
save data?" appears. Select "YES" to save settings, or "NO" not to
save the settings.
NOTE: The edited test items are saved on the system
memory. When you restart the Hardware Diagnostics
Program, the test items will return to the initial settings.
Execution of Test
During DIAGNOSTIC TEST and RUNNING TEST, the
following screen appears: