Toshiba Magnia 3310 - Manual (Page 29)

Setup
Windows Server 2003 Quick Installation
25
TCP/IP Protocol Settings -2
If you selected the onboard 100Mbit LAN Adapter (Ether2) on
one of the previous screens, this dialog box allows you to specify
the IP address, Subnet Mask and Default Gateway Address for this
Adapter.
TCP/IP Protocol Settings -2 screen
To have a domain server automatically assign the IP addresses,
Subnet Masks and Default Gateway for the On-board 100Mbps
LAN Adapter (Ether2), select "Assign an IP Address from DHCP
Server".
Otherwise, do not select "Assign an IP Address from DHCP
Server" and specify the IP address, Subnet Mask, and Default
Gateway Address.
NOTE: For IP Address, Subnet Mask and Default Gateway
Address, you must use decimal numbers (from 0 to 255).