Toshiba Magnia 3310 - Manual (Page 68)

Setup
Windows 2000 Quick Installation 64
Review the information displayed on the Confirm Parameter
Settings screen to make sure that it is accurate. To change a setting,
highlight the item you wish to change and click Jump. The setup
wizard will return to that screen and allow you to make changes.
If you are satisfied with the installation settings, click Execute.
To save configuration information, select [Execute] and then
[Yes]. Setup is started after the configuration information is saved
to the Configuration Save Disk.
NOTE: After finishing the OS installation, continue the setup
according to the procedure described in [Chapter 2 After
Installation (Windows 2000)].
NOTE: In order to save composition information at
Configuration Save Disk, the Floppy Disk Drive needs to be
connected beforehand.
The former contents are eliminated when composition
information is saved at Configuration Save Disk.