Toshiba Magnia 3310 - Manual (Page 54)

Setup
Windows 2000 Quick Installation 50
TCP/IP Protocol Settings -2
If you have specified TCP/IP as the network communication
protocol on the Network Protocol Setting -2 screen, this screen
appears. The TCP/IP Protocol Settings -2 screen allows you to
specify the IP Address, Subnet Mask and Default Gateway
Address for On-board 100Mbps LAN Adapter (Ether2).
TCP/IP Protocol Settings -2 screen
To complete the TCP/IP protocol settings for the On-board
100Mbps LAN Adapter (Ether2), enter the IP Address for On-
board 100Mbps LAN Adapter (Ether2).
To have a DHCP server automatically assign the IP addresses,
Subnet Masks and Default Gateway for the On-board 100Mbps
LAN Adapter (Ether2), select "Assign an IP Address from DHCP
Server".
Otherwise, do not select "Assign an IP Address from DHCP
Server" and specify the IP address, Subnet Mask, and Default
Gateway Address.
NOTE: For IP Address, Subnet Mask and Default Gateway
Address, you must use decimal numbers (from 0 to 255).