Bay Technical Associates DS4-RPC - Manual (Page 49)

DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
42
If enabled, the following header and menu
appears:
Data Switch Series - F.0.10
Bay Technical Associates
Unit ID: DS71
Port Select Code: $BT
Attention Character: ;
Device A (2,1)...............1
Device B (2,2)...............2
Device C (2,3)...............3
Device D (2,4)...............4
Configure.................................C
I/O Modules Reset...................RM
Unit Reset.................................RU
Exit............................................X
Logout.......................................T
Enter Request:
Select #3, “Menu,” from the selection menu,
followed by <cr>. The DS71 or DS71-MD2
module displays the current menu status and
asks if you want to enable:
Menu is............................ Disabled
Enable? (Y/N, CR for no change):
Type “Y” for yes followed by <cr> if you
want to enable Menu. Type “N“ for no
followed by <cr> if you want to disable
Menu. Type <cr> for no change.
NOTE: If Auto Connect Port is enabled, Header and Menu are
automatically disabled.
Auto Connect Port If Auto Connect Port has been enabled, then
the initiation of power to the DS71 or DS71-
MD2 module will connect the user to the
designated I/O port. This also happens when a
modem connection is established.