Bay Technical Associates DS4-RPC - Manual (Page 86)

DS-RPC OWNER’S MANUAL
APPENDIX C
__________________________________________________________________________________________
79
APPENDIX C
PROPERTIES


Highlight the device you have just created.


Select “File” from the Windows task bar.


Select “Properties.”


Select “General.”


Select “Configure.” Ensure the information is correct.


Select “Options.” Enable “Bring up Terminal Window after
Dialing.”


Click “OK.”


Select “Server Type”.


In the “Server Type” Menu, select “PPP: Windows 95, Windows
NT, 3.5, Internet.”


In the “Advanced Options;” Enable software compression.


In the “Allowed Network Protocols;” Enable TCP/IP.


Click “TCP/IP Settings.” Enable the following settings. You must
enable Header Compression.
•
Server Assigned IP Address
•
Server Assigned Name Server Address
•
Use IP Header Compression
•
User default gateway on remote network


Click “OK” three times.


You should be in the Dial-Up Networking screen.


Select the device you are adding. The icon for the device you are
dialing appears on the Dial-Up Networking screen.
DIAL-UP NETWORKING


In the Dial-Up Networking Window, double click the device you are
dialing.


Click “Connect To.”


User Name. Enter the user name programmed in the DS73TP.
Default User Name is user1.


Enter the password programmed in the DS73TP.

Default password is BTA.