Appendix c – Bay Technical Associates DS4-RPC User Manual
Page 87
DS-RPC OWNER’S MANUAL
APPENDIX C
__________________________________________________________________________________________
80
APPENDIX C
Click the “Save Password” box in the “Connect” screen.
Enter the telephone number of the unit you are dialing.
Enter the location you are dialing from, usually Default Location.
Click “Dial Properties.” Select the dialing properties from your
current location.
Click “OK.”
Click “Connect.”
POST DIAL TERMINAL SCREEN
NOTE: You may want to set up the DS73TP module to auto-
connect at dial-up. If not auto connected, you must select the port
from the DS71 or DS71-MD2 module main menu. If you are auto-
connected, and decide not to enter the module, type the attention
character five times to return to the DS71 or DS71-MD2 module
main menu.
After a successful connection is established, select the DS73TP
module. The following menu appears:
DS73TP Ethernet Module F.0.02
Copyright (C) 1997
Bay Technical Associates
Press F7. Windows 95
Dialer enters the user name and password.
Enter User Name:
user1
Enter Password:
BTA
Login successful.
Use your web browser, FTP, TELNET, or any TCP/IP application to
communicate on the network.