Bay Technical Associates DS4-RPC - Manual (Page 83)

DS-RPC OWNER’S MANUAL
APPENDIX B
__________________________________________________________________________________________
76
APPENDIX B
MODEM COMMAND SUMMARY
U.S. ROBOTIC MODEMS
COMMAND INTERPRETATION
AT&B1 Fixed Serial Port Rate (default)
AT&C1 Normal CD Operations (default)
AT&D2 Normal DTR Operations (default)
ATS0=1 Auto answer telephone line in 4 or fewer rings
ATE0 Modem does not display keyboard commands.
ATQ1 Place modem into quiet mode
AT&W0 Save the modem’s configuration in non-volatile
memory
NOTE: To send all of the above at the same time, type the following
command:
AT&B1&C1&D2S0=1E0Q1&W0