Hornady AP with Case Feeder - Manual (Page 11)

11
Step 6: Assemble the square tubing to the frame of the AP Press.
(For serial numbers beyond 07279.)
Figure 6: Square tubing to the frame.
• Place the ¼” Flat Washers (#48) on the ¼-20 x 1 ¼” Socket Head Cap Screw
(SHCS) (#47).
• Place one SHCS thru the Square Tubing (#49) and thread into the Frame.
• Repeat for the second Bracket.
• Tighten both screws down using a 3/16” Allen wrench.
¼-20 1 ¼” Cap Screw (Full Size)