Hornady AP with Case Feeder User Manual
Page 17
17
Step 11: Determine which cartridge case you are going to be loading.
Chart 1 below shows what parts are needed for different size of cases.
Cases
Item #'s Required Pg. 28 & 29
Notes
Small Pistol (9mm, 40 S&W, etc..)
66,14,50,52,53
Cases smaller than .43" maximum diameters
Large Pistol (.357 Mag., .44 Mag, etc..)
13,15,22
Cases larger than .43" maximum diameters
Small Rifle (.223, 22 Hornet)
66,14,50,18,51,52,53
Cases smaller than .43" maximum diameters
Large Rifle (243 Win., 45-70 Govt., etc..)
13,15,18,22
Cases larger than .43" maximum diameters
Chart 1: Cartridge Case change over chart.
If you find that some cases such as the 40 S&W are tight in the Feed Tube –Small (#14),
you may need to use the part of both the large and small feed tubes. For example, 40
S&W could use item numbers 13, 15, 19 and 53.
See figure 11 for more details on selecting the V-Block.
CASES
DIAMETERS "X" V-BLOCK # V-BLOCKS P/N:
22 Hornet
.27-.30
1
398292
9mm, .223
.37-.39
2
398293
44 Mag.
.35-.38
3
398294
30-06
.42-.47
4
398295
458 Win. Mag.
.46-.58
5
398296
10mm
.41-.44
6
398297
Figure 11: V-Block selection chart.