Hornady AP with Case Feeder - Manual (Page 12)

12
Step 7: Adding the case slide on to the sub-plate.
See Figure 7b for more details.
Figure 7a: Case slide assembly.
• While holding the case slide (#38) upside down in one hand, pull the
cardboard packaging rearward till the front edge bi-sects the foot at the front
of the slide.
See Figure 7a for more details.
Figure 7b: Case slide and sub-plate assembly.
• Turn the Case Slide (#38) right side up and start the slide onto the rail of the
sub-plate. While holding the end of the cardboard, push the slide onto the rail.
You may need to push up on the bottom of the cardboard while you are
pushing it on the sub-plate.