Apple Workgroup Server 8150/110 - Manual (Page 22)

Connecting the monitor’s power cord
Monitors have two cords to connect: a power cord and a monitor cable. To
connect the monitor power cord:
1 Place the monitor where you will be using it.
Keep in mind these considerations:
m Allow a few inches for air circulation around the server and monitor.
m Make sure the top of the screen is slightly below eye level when you’re
sitting at the keyboard.
m Position the monitor to minimize glare and reflections on the screen from
overhead lights and windows.
m Consult “Arranging Your Office” in Appendix A for suggestions about
locating your server equipment.
2 Connect the monitor’s power cord to the monitor.
On some monitors, the cord is already attached.
3 Plug in the monitor’s power cord.
Monitor power socket Monitor power cord
6 Chapter 1 / Setting Up Your Server