Apple Workgroup Server 8150/110 - Manual (Page 23)

Some power cords are designed to plug into the back of your server. You can also
plug the power cord into a grounded electrical outlet (an adapter may be needed).
Note: If you have an Apple AudioVision monitor, plug the monitor’s power
cord into the back of the server, not into an outlet.
Some monitors have to be connected to a grounded power outlet, not to the
server’s power socket. Check the information that came with the monitor.
Connecting the monitor cable
After you plug in the monitor’s power cord, connect the monitor cable to the
server’s monitor port.
To connect the monitor cable:
1 Attach the monitor cable to the monitor.
On some monitors, the cable is already attached.
High-density monitor port
Connecting a monitor 7