Apple Workgroup Server 8150/110 - Manual (Page 90)

4 Click Repair to begin testing and, if necessary, repairing the startup disk.
5 When the program is finished, choose Quit from the File menu.
6 Double-click the Apple HD SC Setup icon.
7 Click Update to replace the existing startup disk drive software with a new version.
8 When the startup disk software is updated, choose Quit from the File menu.
9 Make sure that at least 20 MB of disk space is available on the startup disk.
If needed, delete unnecessary files until you have 20 MB of space available.
10 Open the Installer program in the System Software Installers folder on the Workgroup
Server Software CD-ROM disc and click Continue when the Welcome screen appears.
11 If the destination disk named in the Installer screen is not the hard disk on which you
want to do the clean installation, click Switch Disk until the correct name appears.
12 To start the clean installation process, press the Shift-
x x
-K key combination.
13 In the dialog box that appears, click the Install New System Folder button and click OK.
The dialog box disappears, and the Install button in the Installer screen
changes to Clean Install.
14 Click Clean Install and follow any instructions that the Installer displays.
15 If a message reports that installation was not successful, repeat the clean
installation procedure.
WARNING If your startup disk has been formatted for use with Apple
RAID Software, do not use HD SC Setup to update the disk. See the
Apple RAID Software Administrator’s Guide for information about
repairing disks containing RAID volumes.
74 Chapter 6 / Troubleshooting