Apple Workgroup Server 8150/110 - Manual (Page 89)

IMPORTANT Do a clean installation of system software only if you are sure it’s
acceptable to remove any special control panels, extensions, or custom utilities
you have added to your System Folder. These items will not work when moved
out of the System Folder.
Note: You may have to reinstall some server application programs (including
network services) if you do a clean installation; see your server application
program documentation for details.
Follow these steps to do a clean installation:
1 Start up your server from the Workgroup Server Software CD-ROM disc.
If you need instructions, see the section “Starting Up From the CD-ROM
Drive” earlier in this chapter.
2 Open the Utilities folder on the Workgroup Server Software disc, then double-click the
Disk First Aid icon.
3 In the Disk First Aid window, click the icon of the server’s hard disk.
Disk icons appear in a box at the top of the Disk First Aid window.
What to do if your server’s performance decreases 73