Apple Workgroup Server 8150/110 - Manual (Page 29)

m If you see anything else on your screen, or if you see nothing at all, see the
section “Problems Turning On Your Server?” later in this chapter.
IMPORTANT If you need to turn off your server at any point, see “Turning the
Server Off” later in this chapter. It is very important to use the correct
procedure for shutting down your server before turning it off.
Setting the server to restart automatically after a power failure
The Auto Power On/Off control panel provides a convenient way to specify
when your Workgroup Server 8150 shuts down or restarts. For quick recovery
after a power outage, you can set the server to restart as soon as power is
restored.
To specify automatic restart, follow these steps.
1 Open the Auto Power On/Off control panel located in the Control Panels folder.
The control panel displays your options for automatically shutting down and
restarting the server at a certain time or on a regular basis.
2 Click the “Automatically restart after power failure” option so that a checkmark appears
in the box.
The option takes effect as soon as you set it.
This option sets the server to
restart automatically.
Turning the server on 13