Apple Workgroup Server 8150/110 - Manual (Page 85)

2 Check that the destination disk indicated in the Installer is the one on which you want to
install system software.
If not, click the Switch Disk button until the correct disk name appears.
Note: If you are using the Installer on a hard disk that doesn’t have system
software, the explanatory text on-screen will be slightly different from what’s
shown in this example.
3 Click Install.
The Easy Install status box appears and keeps you informed of progress during
installation.
If you are installing from floppy disks, follow the instructions asking you to
insert different disks.
4 If you see a message telling you that you need to restart your system, click Restart.
Otherwise, click Quit.
If a message reports that installation was not successful, try installing again.
(Follow the instructions on the screen.)
That’s it. You’ve installed Macintosh system software on your startup disk.
Note: The Installer also has a “custom” feature that lets you install or remove
one or more items. See the Installer’s Help information for more details.
This is the disk on
which system software
will be installed.
Click to indicate a
different disk.
When you need to reinstall system software 69