Beyerdynamic MCS-D 200 - Manual (Page 17)

MCS-D 200 Control Unit
E 17
3.3.4.1 Mode / Limit menus
In the MODES/LIMITS menu you can enter the operating mode and number of open microphones (limit) for the selected session
(here it is session 01).
Free Mode
Each delegate can turn on the microphone of the microphone station if the selected number of open microphones (limit) is not
exceeded.
Limit - Free
Determine the maximum number of open microphones. The maximum number is 16.
Request Mode
Delegates enter a request-to-speak by pressing the microphone button. The request-to-speak is registered if the number of
possible requests to speak (limit) is not exceeded. By pressing the “0” button the chairman can release the registered request-
to-speak.
Limit - Request
Determine the maximum number of requests to speak. The maximum number is 16.
If the limit is set to 2 or higher, the microphones of the registered speakers are turned on simultaneously by pressing the “0”
button. If only one speaker is to speak, the limit of the Request mode must be set to 1.
Auto Mode
The request-to-speak/turning on of microphones is one after another. Each delegate can turn on his microphone by pressing
the microphone button if the selected limit is not exceeded. If the limit is exceeded, the request-to-speak is registered in the
MCS-D 200 control unit. The microphone unit is turned on automatically as soon as a current speaker turns off his microphone.
LIMIT - Auto-Free:
Determine the maximum number of open microphones. The maximum number is 16.
LIMIT - Auto-Request:
Determine the maximum number of simultaneous requests to speak. The maximum number is 16.
FIFO Mode (First In - First Out)
The microphones are turned on one after another. Each delegate can turn on the microphone of his microphone station by
pressing the microphone button. If the limit is exceeded, the microphone of the delegate speaking the longest is turned off
automatically (first in - first out).
LIMIT - FiFo:
Determine the maximum number of open microphones. The maximum number is 16.
Note:
If the rights of a chairman station are assigned to a microphone station via the MCS-D 200 control unit, the chairman can
control the meeting actively by using the following function buttons:
CANCEL button to cancel turned on microphones and/or requests to speak.
PRIORITY button to mute turned on microphones.
NEXT button = press the “0” button to select the next request-to-speak.
PREVIOUS button = press the “9” button to select the previous speaker.
press the ENTER button