Beyerdynamic MCS-D 200 - Manual (Page 28)

MCS-D 200 Control Unit
E 28
3.3.6 Options
3.3.6.1 Time
In the TIME menu the system time for the MCS-D 200 control unit, MCS-D 202 and MCS-D 2073 microphone stations can be set
manually (refer to chapter 7.1.6 “Menu settings”) in the format HOURS – MINUTES – SECONDS.
When the iCNS software is started, the system time is refreshed automatically.
The current system time is displayed in the CURRENT TIME line as:
HOURS : MINUTES : SECONDS.
You can change the time in the line below. Use the right or left hand navigator button to go from HOURS to MINUTES and
SECONDS. Use the up or down navigator button to set the new values and press the SET button to confirm.
press the ENTER button
Use the up or down navigator button for
scrolling
Current time setting
Refreshed time setting
press the SET button to confirm
Use the right or left hand navigator button
to go from HOURS to MINUTES and SECONDS
Use the up or down
navigator button to
edit the numbers