Beyerdynamic MCS-D 200 - Manual (Page 59)

7.3.2 How to display the Device ID
In order to display the device ID press the 5th button (on the very right) of the voting buttons of the appropriate
microphone station. During a voting the device ID cannot be displayed.
MCS-D 3171 / 3173 Microphone Stations
E 59
Lateral view MCS-D 3171 and MCS-D 3173
left hand side right hand side
Microphone
LED strip illuminates when the microphone is activated.
Loudspeaker. The original signal of the conference is transmitted via the loudspeakers. As soon as the microphone is
activated the loudspeaker will be deactivated. The volume is set via the control unit.
Microphone button with LED to activate the microphone.
LC display
Voting buttons. Button 1 to 3 for parliamentary votings. Button 1 to 5 for multiple choice.
Navigator buttons right / left to select the headphone volume
Navigator buttons up / down to select a channel
MCS-D 3173 only: “Clear” button to clear all activated delegate microphones.
MCS-D 3173 only: “Prior” button to mute all activated delegate microphones and to turn on the
MCS-D 3173 microphone.
NetRateBus sockets, push-pull. To connect the microphone stations in a daisy chain.
Headphone socket, mini stereo jack (3.5 mm), to connect a headphone or recorder.
Chip card reader (optional)
1
2
3
4
5
6
6
7
8
2 2
9
10
11
12
13
Bottom view MCS-D 3171 H and MCS-D 3173 H
12
11 11