Beyerdynamic MCS-D 200 - Manual (Page 74)

System Setup
E 74
Additional power supply units when the microphone units are set up in a circle
With redundancy i.e. powering the microphone stations on both sides, any cable of the circle can be removed during operation
without interrupting the meeting. All microphone stations are then powered on one side. In this way a microphone station can
be replaced during operation for example.
A condition for redundancy is that all cable lengths had been selected in a way that a single-sided powering could cover the
power requirement.
OK
MCS-D 200
CA 4115/30/45 power supply unit
CA 4115/30/45
Setup of the microphone stations in a circle
With redundancy i.e. powering the microphone stations on both sides, any cable of the circle can be removed during operation
without interrupting the meeting. All microphone stations are then powered on one side. In this way a microphone station can
be replaced during operation for example.
A condition for redundancy is that all cable lengths had been selected in a way that a single-sided powering could cover the
power requirement.
OK
MCS-D 200
CA 4115/30/45 power supply unit